Transparent Clear River Table Epoxy Resin For Wood Coating Adhesive 3D Floor Epoxy adhesive is potted need to be kept dry and clean; Please check the A agent first, observe whether there is any sedimentation, and stir the A agent evenly;
According to the ratio of the ratio, and the weighing is accurate, please remember that the ratio is the weight ratio rather than the volume ratio.
After mixing the A and B agents, stir well to avoid incomplete curing.
After mixing evenly, please fill the glue in time, and try to use the mixed glue in the available time;
Keep the environment clean during the curing process to prevent impurities or dust from falling onto the surface of the uncured glue
Application:
Perfect for River Tables, Deep Cast Arts & Crafts, Woodworking, and much more
Warm Notes:
1. Proportion: A: B = 3:1 (weight ratio)
2. Available time: 25°C×20 minutes (10kg mixing amount)
3. Curing condition, dry at room temperature for 24 hours
4.After demoulding, it takes 48 hours to react to complete hardness to achieve grinding hardness.
5.Medium hardness: shore D >84.
6.Potting thickness must not exceed 10CM. If it exceeds the limit thickness, the product will be deteriorated due to heat and high temperature. Because the product will produce heat on the open surface of the mold during the curing process.
7.Glue contacting with the air surface should be arranged in moderation.
8.The mixing amount should not be less than 3KG.Too small mixing amount will result in prolonged curing time of the product.
Using instruction :
Features:
1.DEEP POUR EPOXY RESIN
The epoxy resin is the ideal choice for DIY crafts and amazing artwork. It is durable and strong, to protect your work against damage, and UV and heat-resistant, so your crafts will pass the test of time.
2.CRYSTAL CLEAR: Our ProPour
It is a high-quality product, with a crystal-clear composition and a bubble-less finish, ideal for your artworks. Also, it has amazing color stability distributing any pigments or inks evenly, with no effort.
3.SUPERIOR QUALITY:
It is made of carefully chosen ingredients, so your art would have a long lifespan. Our epoxy resin is designed to resist yellowing, has an improved impact strength, and is UV and water-resistant.
4. EXQUISITE CRAFTWORK: This amazing two-component clear epoxy resin is the right solution for your craftwork. It has an ultra-clear formula and leaves a wet gloss finish that will make your art pieces look spectacular. It is great for castings, tabletops, river tables, jewelry, see-through encapsulations and so much more.
5. EASY TO USE: Working with the clear casting resin is so convenient and easy. The deep pour epoxy resin is self-leveling and has an excellent air bubble release. You just need to prepare the formula, add color if desired, and complete your artwork.
Operation Steps:
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing,suggest to use the heat curing.
Packing:
5kg/drum, 20kg/drum, 200kg/drum
){kind=link}